Programmable Power Supply
Telonic has been supplying the electronics industry, research establishments & universities with programmable DC Power Supply units since 1968. Telonic is an ISO9001 Registered company. Programmable DC power supply

Sorenson DCS Series Programmable DC Power Supplies

0 - 600V | 0 - 350A | 31 Models

Sorenson DCS Series DC Power Supplies



  • Easy master/slave paralleling with active current sharing

    Remote Programming

    • Selectable remote programming for voltage, current and OVP
    • 16 bit programming through LXI -compliant Ethernet LAN / RS-232C (M130)
    • 12-bit programming through IEEE-488.2 / RS-232C (Option M9C)Isolated analog programming (Option M51)
    • Multichannel slave interface (Option M85 or M131)


    • IVI-com driver for M130 option
    • Labwindows CVI driver for M9C option
    • Labview driver for M9C option



The Programmable DCS Family of 1 kW, 1.2 kW and 3* kW programmable power supplies utilizes unique packaging techniques to achieve continuous full output power (1 kW, 1.2 kW or 3* kW) in any volt/amp combination within the rated output voltage and current limits in a low profile chassis. Demonstrated large installed base over a long period of time, the DCS family provides a highly reliable power platform.

The Programmable DCS Power Supplies have an easy-to-use front panel with 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and over voltage protection, status and constant-voltage/current mode operation. The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/local programming and preview status of voltage, current and OVP setpoints.

The Programmable DCS Power Supplies can also be controlled remotely. Four analogue control modes are standard as well as isolated analog control (option). Computer control can be accomplished over IEEE488.2 GPIB (option) or LXI-compliant Ethernet (option)

* The 3kW must be limited to 2.5kW for 230Vac single phase input, 3 phase input is 208Vac only.

PDF Information Pack
How to buy our products
Contact Us


Programmable DC Power Supplies - ModelOutput Voltage

Output Current

1kW Models

Output Current

1.2kW Models

Output Current

3kW Model*


Sorenson DCS8-125E / DCS8-140E / DCS8-350E

0-8V 0-125A0-140A0-350A Please Call

Sorenson DCS10-100E / DCS10-120E

0-10V0-100A0-120A-Please Call

Sorenson DCS12-250E

0-250APlease Call

Sorenson DCS20-50E / DCS20-60E / DCS20-150E

0-20V 0-50A0-60A 0-150A Please Call

Sorenson DCS33-33E / DCS33-36E

0-36A -
Please Call

Sorenson DCS40-25E / DCS40-30E/ DCS40-75E

0-40V 0-25A0-30A 0-75A Please Call

Sorenson DCS55-55E

0-55V -
0-55APlease Call

Sorenson DCS60-18E / DCS60-20E / DCS60-50E

0-60V 0-18A0-20A 0-50A Please Call

Sorenson DCS80-13E / DCS80-15E / DCS80-37E

0-80V 0-13A
0-15A0-37APlease Call

Sorenson DCS100-10E / DCS100-12E

0-12A -Please Call

Sorenson DCS150-7E / DCS150-8E / DCS150-20E

0-150V 0-7A
0-8A 0-20APlease Call

Sorenson DCS300-3.5E / DCS300-4E

0-300V 0-3.5A
0-4A -Please Call

Sorenson DCS600-1.7E

0-600V 0-1.7A
Please Call